Instantly Fix Chin Recession Updated Guide to DIY Chin Filler + INJECTION VIDEOS (2 Viewers)

[sensitive sapphire]

Yes.

than why whould u do it

 

[Dimorphic]

accutane bro take it

 

[Syna]

arent fillers temporary?

yes

 

[Syna]

accutane bro take it

?

 

[Orka]

than why whould u do it

what kind of logic is this?

If you stop most looksmaxes you'll stop seeing results, minox, skincare, steroids, etc.

 

[Syna]

what kind of logic is this?

If you stop most looksmaxes you'll stop seeing results, minox, skincare, steroids, etc.

"why do u live if u are gonna die" ahh type of guy logic

 

[Certifedsubhuman]

TLDR but I’m mirin the effort

 

[Perfectionist]

Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

31/01/2026
Orka here, I do not recommend Revolax Deep anymore. I used it for this but my results quickly faded. Do your own research into filler types & brands and don't take advice blindly.
I will be using medeyra shape for my next chin session after dissolving this.
20/02/2026
I have gotten several dms regarding this guide.
The updated guide you are reading is exclusive to .gg, and has updated segments which were not mentioned on other forums.
I've ordered more filler to do more on my chin, and I'll make another guide once I successfully inject my jaw.

---

Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results

---

1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)

Spoiler: mirin

View attachment 30427
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:

View attachment 30441

Lidocaine is only needed if you're too much of a bitch to push the needle in, most filler types are linked with lidocaine, meaning that as you inject, it'll numb the region you're injecting in anyways

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was enough

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here for a new source ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 30442

Put the syringe in, then flick it back a little bit (not hard enough to the point you're trying to extract shit)

If there's blood, you need to change your injection site.

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting a vessel on accident.
My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate arteries & other vessels in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.

Spoiler: Videos for technique

I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.

This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

3. Injection Site
View attachment 30443
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


View attachment 30444
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
To figure out the general horizontal height of the arteries, it's rough & honestly not neccesary, but it made me more comfortable.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 30445
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick.

This isn't conventional, and was pretty weird for me to do, but again, just made me more comfortable.

---

4. Injection Process

Spoiler: Injection Video [ Right Side ]

https://streamable.com/jygbp7

Spoiler: Injection Video [ Central ]

https://streamable.com/wez97k
By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol

Spoiler: Injection Video [ Left Side ]

https://streamable.com/admtd1

Spoiler: Short Video from 2nd session

https://streamable.com/5of6ye

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)

Spoiler: I recommend this

View attachment 30435
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters:

Mine (Orka)
View attachment 30428View attachment 30429

"@Asian" on org (photos sent to me by him after following this guide)
View attachment 30430View attachment 30431

"@Sayori" on org (photos sent to me by him after following this guide)
View attachment 30432View attachment 30433


Good luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

Veridic dior Godveil Heir

Beautiful guide

 

[sensitive sapphire]

what kind of logic is this?

If you stop most looksmaxes you'll stop seeing results, minox, skincare, steroids, etc.

im just saying if u want to fix a problam you should ignore the temporary solution and not waste money on it,insted you should save that money and a bit more to get a permanent solution

 

[Orka]

im just saying if u want to fix a problam you should ignore the temporary solution and not waste money on it,insted you should save that money and a bit more to get a permanent solution

It's $30

 

[dior]

im just saying if u want to fix a problam you should ignore the temporary solution and not waste money on it,insted you should save that money and a bit more to get a permanent solution

Filler is an easy solution, no one in their right mind is paying 7 grand for a surgeon to slice ur chin and move it 2mm foward jfl

 

[sensitive sapphire]

It's $30

we just talking why you so mad nigga,and i didnt read it just looked at the thumbnail and if its 30 bucks its worth it

 

[Orka]

we just talking why you so mad nigga,and i didnt read it just looked at the thumbnail and if its 30 bucks its worth it

Fine, I apologize & take it back.

 

[Asylantenboy]

These 2 niggas below you is uglycel

 

[coping gymcel]

d-d-d-does that mean i'm going to have richard ramirez's chin?
do I actually need it tho

 

[Tismo]

read and bookmarked goated thread

 

[tuv]

botched me thanks bro ur guide is cheeks

No way u botched urself lol wth u need to dissolve that shit with hyaluronase

 

[Dimorphic]

No way u botched urself lol wth u need to dissolve that shit with hyaluronase

i didnt its all orkas fault

 

[coloringhalo]

Basics:
https://looksmax.gg/threads/a-concise-guide-to-types-uses-risks-of-fillers.10060/

Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

31/01/2026
Orka here, I do not recommend Revolax Deep anymore. I used it for this but my results quickly faded. Do your own research into filler types & brands and don't take advice blindly.
I will be using medeyra shape for my next chin session after dissolving this.
20/02/2026
I have gotten several dms regarding this guide.
The updated guide you are reading is exclusive to .gg, and has updated segments which were not mentioned on other forums.
I've ordered more filler to do more on my chin, and I'll make another guide once I successfully inject my jaw.

---

Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results

---

1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)

Spoiler: mirin

View attachment 30427
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:

View attachment 30441

Lidocaine is only needed if you're too much of a bitch to push the needle in, most filler types are linked with lidocaine, meaning that as you inject, it'll numb the region you're injecting in anyways

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was enough

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here for a new source ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 30442

Put the syringe in, then flick it back a little bit (not hard enough to the point you're trying to extract shit)

If there's blood, you need to change your injection site.

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting a vessel on accident.
My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate arteries & other vessels in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.

Spoiler: Videos for technique

I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.

This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

3. Injection Site
View attachment 30443
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


View attachment 30444
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
To figure out the general horizontal height of the arteries, it's rough & honestly not neccesary, but it made me more comfortable.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 30445
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick.

This isn't conventional, and was pretty weird for me to do, but again, just made me more comfortable.

---

4. Injection Process

Spoiler: Injection Video [ Right Side ]

https://streamable.com/jygbp7

Spoiler: Injection Video [ Central ]

https://streamable.com/wez97k
By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol

Spoiler: Injection Video [ Left Side ]

https://streamable.com/admtd1

Spoiler: Short Video from 2nd session

https://streamable.com/5of6ye

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)

Spoiler: I recommend this

View attachment 30435
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters:

Mine (Orka)
View attachment 30428View attachment 30429

"@Asian" on org (photos sent to me by him after following this guide)
View attachment 30430View attachment 30431

"@Sayori" on org (photos sent to me by him after following this guide)
View attachment 30432View attachment 30433


Good luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

Veridic dior Godveil Heir

bookmarked, haven’t seen this before

 

[misanthrope]

Indeed

Since I had time to let the post age, I managed to learn more & got DMs of people showing me their results

I'm very proud of them.

bit late but do you recommend Medyra Shape? if its possible could we talk in dms or something

 

[Griffith]

dnr anything YET, but I'm sure it's a great guide bhai

 

[Scorpion]

Basics:
https://looksmax.gg/threads/a-concise-guide-to-types-uses-risks-of-fillers.10060/

Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

31/01/2026
Orka here, I do not recommend Revolax Deep anymore. I used it for this but my results quickly faded. Do your own research into filler types & brands and don't take advice blindly.
I will be using medeyra shape for my next chin session after dissolving this.
20/02/2026
I have gotten several dms regarding this guide.
The updated guide you are reading is exclusive to .gg, and has updated segments which were not mentioned on other forums.
I've ordered more filler to do more on my chin, and I'll make another guide once I successfully inject my jaw.

---

Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results

---

1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)

Spoiler: mirin

View attachment 30427
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:

View attachment 30441

Lidocaine is only needed if you're too much of a bitch to push the needle in, most filler types are linked with lidocaine, meaning that as you inject, it'll numb the region you're injecting in anyways

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was enough

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here for a new source ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 30442

Put the syringe in, then flick it back a little bit (not hard enough to the point you're trying to extract shit)

If there's blood, you need to change your injection site.

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting a vessel on accident.
My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate arteries & other vessels in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.

Spoiler: Videos for technique

I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.

This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

3. Injection Site
View attachment 30443
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


View attachment 30444
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
To figure out the general horizontal height of the arteries, it's rough & honestly not neccesary, but it made me more comfortable.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 30445
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick.

This isn't conventional, and was pretty weird for me to do, but again, just made me more comfortable.

---

4. Injection Process

Spoiler: Injection Video [ Right Side ]

https://streamable.com/jygbp7

Spoiler: Injection Video [ Central ]

https://streamable.com/wez97k
By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol

Spoiler: Injection Video [ Left Side ]

https://streamable.com/admtd1

Spoiler: Short Video from 2nd session

https://streamable.com/5of6ye

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)

Spoiler: I recommend this

View attachment 30435
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters:

Mine (Orka)
View attachment 30428View attachment 30429

"@Asian" on org (photos sent to me by him after following this guide)
View attachment 30430View attachment 30431

"@Sayori" on org (photos sent to me by him after following this guide)
View attachment 30432View attachment 30433


Good luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

Veridic dior Godveil Heir

Dnr

 

[nineteen]

Dnr

is your username threatening me?

 

[tuv]

Basics:
https://looksmax.gg/threads/a-concise-guide-to-types-uses-risks-of-fillers.10060/

Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

31/01/2026
Orka here, I do not recommend Revolax Deep anymore. I used it for this but my results quickly faded. Do your own research into filler types & brands and don't take advice blindly.
I will be using medeyra shape for my next chin session after dissolving this.
20/02/2026
I have gotten several dms regarding this guide.
The updated guide you are reading is exclusive to .gg, and has updated segments which were not mentioned on other forums.
I've ordered more filler to do more on my chin, and I'll make another guide once I successfully inject my jaw.

---

Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results

---

1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)

Spoiler: mirin

View attachment 30427
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:

View attachment 30441

Lidocaine is only needed if you're too much of a bitch to push the needle in, most filler types are linked with lidocaine, meaning that as you inject, it'll numb the region you're injecting in anyways

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was enough

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here for a new source ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 30442

Put the syringe in, then flick it back a little bit (not hard enough to the point you're trying to extract shit)

If there's blood, you need to change your injection site.

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting a vessel on accident.
My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate arteries & other vessels in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.

Spoiler: Videos for technique

I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.

This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

3. Injection Site
View attachment 30443
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


View attachment 30444
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
To figure out the general horizontal height of the arteries, it's rough & honestly not neccesary, but it made me more comfortable.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 30445
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick.

This isn't conventional, and was pretty weird for me to do, but again, just made me more comfortable.

---

4. Injection Process

Spoiler: Injection Video [ Right Side ]

https://streamable.com/jygbp7

Spoiler: Injection Video [ Central ]

https://streamable.com/wez97k
By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol

Spoiler: Injection Video [ Left Side ]

https://streamable.com/admtd1

Spoiler: Short Video from 2nd session

https://streamable.com/5of6ye

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)

Spoiler: I recommend this

View attachment 30435
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters:

Mine (Orka)
View attachment 30428View attachment 30429

"@Asian" on org (photos sent to me by him after following this guide)
View attachment 30430View attachment 30431

"@Sayori" on org (photos sent to me by him after following this guide)
View attachment 30432View attachment 30433


Good luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

Veridic dior Godveil Heir

i just did this, and holy shit its good. But maybe 2ML is a bit too small, i'll try 3ML next time

 

[Scorpion]

is your username threatening me?

Nah nineteen is a cool name

 

[Scorpion]

is your username threatening me?

Bro i thought u said “is my name threatening you”
Im such a retard

 

[nineteen]

Bro i thought u said “is my name threatening you”
Im such a retard

 

[ysl]

Mirin hard

 

[kolty]

high effort guide for nothing, u can achieve same results with just a hammer. mirin the before n after tho

 

[Syna]

high effort guide for nothing, u can achieve same results with just a hammer. mirin the before n after tho

Orka

 

[Orka]

Orka

Not even gonna respond

 

[Jester4Foids]

Basics:
https://looksmax.gg/threads/a-concise-guide-to-types-uses-risks-of-fillers.10060/

Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

31/01/2026
Orka here, I do not recommend Revolax Deep anymore. I used it for this but my results quickly faded. Do your own research into filler types & brands and don't take advice blindly.
I will be using medeyra shape for my next chin session after dissolving this.
20/02/2026
I have gotten several dms regarding this guide.
The updated guide you are reading is exclusive to .gg, and has updated segments which were not mentioned on other forums.
I've ordered more filler to do more on my chin, and I'll make another guide once I successfully inject my jaw.

---

Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results

---

1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)

Spoiler: mirin

View attachment 30427
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:

View attachment 30441

Lidocaine is only needed if you're too much of a bitch to push the needle in, most filler types are linked with lidocaine, meaning that as you inject, it'll numb the region you're injecting in anyways

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was enough

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here for a new source ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 30442

Put the syringe in, then flick it back a little bit (not hard enough to the point you're trying to extract shit)

If there's blood, you need to change your injection site.

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting a vessel on accident.
My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate arteries & other vessels in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.

Spoiler: Videos for technique

I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.

This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

3. Injection Site
View attachment 30443
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


View attachment 30444
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
To figure out the general horizontal height of the arteries, it's rough & honestly not neccesary, but it made me more comfortable.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 30445
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick.

This isn't conventional, and was pretty weird for me to do, but again, just made me more comfortable.

---

4. Injection Process

Spoiler: Injection Video [ Right Side ]

https://streamable.com/jygbp7

Spoiler: Injection Video [ Central ]

https://streamable.com/wez97k
By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol

Spoiler: Injection Video [ Left Side ]

https://streamable.com/admtd1

Spoiler: Short Video from 2nd session

https://streamable.com/5of6ye

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)

Spoiler: I recommend this

View attachment 30435
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters:

Mine (Orka)
View attachment 30428View attachment 30429

"@Asian" on org (photos sent to me by him after following this guide)
View attachment 30430View attachment 30431

"@Sayori" on org (photos sent to me by him after following this guide)
View attachment 30432View attachment 30433


Good luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

Veridic dior Godveil Heir

mirin

 

[madeforfailure]

mirin post holy

 

[aryandiva]

Basics:
https://looksmax.gg/threads/a-concise-guide-to-types-uses-risks-of-fillers.10060/

Instantly fix chin recession | A Guide to DIY Chin filler
Injection Videos at Chap. 4

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

31/01/2026
Orka here, I do not recommend Revolax Deep anymore. I used it for this but my results quickly faded. Do your own research into filler types & brands and don't take advice blindly.
I will be using medeyra shape for my next chin session after dissolving this.
20/02/2026
I have gotten several dms regarding this guide.
The updated guide you are reading is exclusive to .gg, and has updated segments which were not mentioned on other forums.
I've ordered more filler to do more on my chin, and I'll make another guide once I successfully inject my jaw.

---

Table Of Contents:

1. Pre-injection planning & research

2. Risk-prevention measures & Technique

3. Injection Site Explanation

4. Injection process [ VIDEOS ]

5. Healing process & results

---

1. Pre-injection planning

This is the most important part, you’re going to want to do your own research and not rely solely on this thread for information.

I personally went to r/DIYCosmeticProcedures & r/DIYHeaven to ask for advice, but everybody there was high inhib asf and started telling me not to do it (it ended up being fine)

Spoiler: mirin

View attachment 30427
I made a post calling them high inhib retards once I did my chin filler after they told me not to kek

The main risk during the injection process is if you accidentally fill an artery with filler (Vascular Occlusion), this cuts off extremely important blood flow and can eventually lead to necrosis. If this is your first DIY Injection I'd strongly suggest you get hyaluronidase; a dissolver for Hyaluronic Acid filler. Hyaluronidase acts fast, meaning if you botch yourself, inject incorrectly or have any complications, you can inject hyaluronidase in a nearby area to the filler & be fine. I would still seriously recommend you go to an ER or a hospital even after you dissolve the filler, you can never be too sure, and necrosis is really serious.

You can reconstitute Hyaluronidase similar to any peptide, and load it into a needle the same way aswell.

I’ll make a follow up thread on how I end up dissolving my filler (to reduce any chance of migration) in about 8-9 months.

With all this in mind, here’s what my setup looked like:

View attachment 30441

Lidocaine is only needed if you're too much of a bitch to push the needle in, most filler types are linked with lidocaine, meaning that as you inject, it'll numb the region you're injecting in anyways

ITEMS & DESCRIPTIONS:
Filler: This is the main thing I'll be injecting, the two caps at the top are equippable onto the syringe if one goes dull, but I only used 1 of the tops during this process
Dissolver: Hyaluronidase is an "anitdote" for Hyaluronic Acid, if you mess up, botch yourself etc. you'll be using this to dissolve the filler.
Needles & Saline for dissolver: Saline to put in with the Hyaluronidase as its in a powder form, then needles to extract and inject the dissolver ( I didn't have to. )
Lidocaine: Lidocaine is a topical numbing gel, I got it in a 1% concentration, which was enough

I used Revolax Deep with Lidocaine for the filler, and got my hyaluronidase (dissolver) from here
[ Note: The FDA in america are cracking down on sites selling botox specifically, acecosm is one of them, if you're reading this thread in the future and acecosm has shut down, feel free to contact me on here for a new source ]

On top of this, I had rubber gloves & alcohol wipes which i got at a grocery store to keep everything sterile, I just couldn't be asked to include it in the photo lol

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

2. Risk-prevention measures & Technique

Throughout this injection I aspirated for each injection point, aspirating is when you leave your needle in the injection site for 10-12 seconds, and check if any blood starts leaking into the needle.

This is what it'll look like if the needle is inside an artery, if you see this while aspirating, you should change injection spots. No worries though, you can still use the same needle

View attachment 30442

Put the syringe in, then flick it back a little bit (not hard enough to the point you're trying to extract shit)

If there's blood, you need to change your injection site.

I have hyaluronidase & saline on standby if I do end up, for whatever reason, injecting a vessel on accident.
My injection was done at 3AM on a Thursday, I couldn’t let my parents find out so I gave myself time to inject, then stayed up all night, by the time it was 9AM I could tell if I did anything wrong or not, and 6 hours is more than enough time to pass to be able to go to sleep afterwards.

Usually, professionals will get ultrasounds to guide them through being able to locate arteries & other vessels in real time, but you and I do not have access to a real time ultrasound of ourselves. Aspirating will have to do, it's not perfect, but it's somewhat reliable.

Now that we have a way to sorta eliminate the risk factor in this, you have to understand filler isn't just about not getting a VO, you also want an aesthetic result at the end of the day, and avoid migration as much as you can.

I'm going to be completely honest, you could study the shit out of the technique and still get it wrong, this chin filler was one of many DIY things I'll be doing to myself, practice makes perfect, studying doesn't. But you still want to try to mimick the perfect technique as much as you can, I've linked some videos below, you should try to study & analyze the technique yourself, I unfortunately cannot help you in this step.

Spoiler: Videos for technique

I would not recommend using a cannula since your main goal here should be to go bone-deep. Cannula's are used for higher risk places that need to cover more surface area, I will probably never use a cannula as I try to avoid injecting superficially by any means.

This is the video I watched the most, and the technique I attempted to follow.

View attachment 4382424
The "professionals" injecting you are often also watching these tutorial videos too btw, most injectors at clinics are clueless

I injected a LOT slower than the injectors and was sweating while doing it, but the job was done at the end of the day.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

3. Injection Site
View attachment 30443
This is the image you should keep in mind when doing filler, you'll see the well-known "triangle of death" forming with all the arteries that run through the midface, and you'll also notice the empty spot near the bottom of the chin; this is our safe space, where we can inject without too much risk (BUT STILL RISKY IF YOU ARENT EXPERIENCED). You can also see why injecting wider (for width) becomes even riskier.


View attachment 30444
For men, you want to draw your vertical lines starting from the end of the lips, even if you're just aiming for projection like I was, for women it starts at the nasal base since narrow chins look feminine, and wider chins look masculine.

I divided these injections across 2 sessions, 1st session covered the top 3, 2nd session covered the bottom 2.

Here's what I did (this is not my chin in the pic)
Black Lines:
Drew lines from the edges of my lips fully down
The curved line was just to surround and isolate my actual chin, basically go around the somewhat projected area, the natural curve on ur chin

Green Line:
From the center of my lips, drew a straight line, I then used this line to draw the red lines (to mark arteries)

Red Lines:
To figure out the general horizontal height of the arteries, it's rough & honestly not neccesary, but it made me more comfortable.

Yellow Line:
After everything, I split my chin in half with another line, then I'd pick injection spots on the lower end to ensure I actually got more projection and didn't just even it out jfl

Circles:
I Made a mistake here & should've placed the center circle a bit lower, but the graphic is true to how I actually injected it, the left and right were fine, id just suggest you go a tiny bit lower than I did if you're recreating this.

!! IF RECREATING, WITH THE GOAL OF PROJECTION, I RECOMMEND INJECTING THE CENTER FURTHER DOWN, THIS WAS A NEWBIE MISTAKE BY ME

Here's another image of the drawings actually ON my chin:
View attachment 30445
I drew this on with my eyebrow pen, you can use a marker, just don't make the lines too thick.

This isn't conventional, and was pretty weird for me to do, but again, just made me more comfortable.

---

4. Injection Process

Spoiler: Injection Video [ Right Side ]

https://streamable.com/jygbp7

Spoiler: Injection Video [ Central ]

https://streamable.com/wez97k
By "I can feel it" I meant I could feel the filler on my bone, it wasn't painful, just funny to feel lol

Spoiler: Injection Video [ Left Side ]

https://streamable.com/admtd1

Spoiler: Short Video from 2nd session

https://streamable.com/5of6ye

This is the process I followed:
Needle in until i felt the texture of my bone, you'll feel a weird fuzzy feeling once you reach it, kinda like having a numb foot.

Once I reach the bone, aspirate, keep the needle in for 10-12 seconds, and monitor the needle with a nearby mirror (which was on the right, you can notice I looked at it several times)

Spoiler: I recommend this

View attachment 30435
I usually have one of these on me with a magnifying side of the mirror ( Basically just to zoom in ), but unfortunately mine was broken during this process, I just used a mirror close to me

If the aspiration was successful and I didn't draw any blood, I would start injecting, I started pulling out slowly, then pushing back in; This is to make sure I'm not literally pushing out nothing by pressing on my bone, and that there's space for the filler to go, but not too superficially (although I did mess up for my central one and went too far out, I'd recommend staying deeper)

After feeling the filler on my bone, no blood drawn, and checking how much filler I actually used, I could finally pull the needle out and deem that area as successfully injected, and move onto the next to repeat the process.

This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

5. Healing Process & Results

Gonna be honest here, the healing process was decent, but I did several things I shouldn't have.

Don't massage or touch the filler once it's inside, the filler (at least the one I used) feels like actual bone, so you might think its fine to, but seriously, let it heal, don't touch it at all for around a week, then you're fine.

I would recommend sleeping on your back for this period, but honestly it doesn't really matter. Just make sure your injections are symmetrical & you'll be fine.

Before & Afters:

Mine (Orka)
View attachment 30428View attachment 30429

"@Asian" on org (photos sent to me by him after following this guide)
View attachment 30430View attachment 30431

"@Sayori" on org (photos sent to me by him after following this guide)
View attachment 30432View attachment 30433


Good luck! and remember.... This post is not a guide or tutorial, nor is it meant to encourage anyone to attempt the same procedure. I’m simply sharing my personal experience for informational purposes only. I was fully aware of the risks involved when I decided to do this myself. I am not responsible for any harm, complications, or outcomes that may occur if someone chooses to replicate or act on what I’ve done.

---

Veridic dior Godveil Heir

Thank youu